1-800-921-9494EMAIL US
0item(s)

You have no items in your toolbox.

Product was successfully added to your shopping cart.

Q-Z

Set Descending Direction

Items 21 to 30 of 69 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Trident X2 Process & Temperature Meter

    Input: Process: 0-20 mA, 4-20 mA; ±10 VDC (0-5, 1-5, 0-10 V) Temperature: Thermocouple J, K, T, E; RTD 100 Ω Pt Display: 4-digit, 1.20" (30.5 mm) Case: 1/8DIN, NEMA 4X/IP65 Power: 85-265 VAC or 12-36 VDC option Operating Temperature: 0 to 65°C
  2. Model 2 Wide Range Digital Gauge™

    Like the Model 1, the Model 2 will replace the need to use many gauges of different ranges to achieve and maintain high accuracy (0.05% f.s.) throughout a wide span (2,500-10,000 psi). The need for multiple gauges is eliminated. The Model 2 is explosion proof and fully temperature compensated. It has a large, vibrant one line display. It is housed in a high impact, sturdy case with an optional rubber boot for additional protection. Model 2 runs on three AA batteries. This gauge is destined to become the standard of the industry!

    Data Sheet & Manual Coming Soon
  3. Condec PIN8000 / PIN8010 - Pneumatic Pressure Intensifier

    Temperature Range: Operating: 40°F to 140°F (4°C to 60°C) Storage: 0°F to 185°F (-17°C to 85°C) Relative humidity: 95%, non-condensing. Pressure Media: Clean dry gaseous nitrogen or clean dry air

    Download Data Sheet
  4. PP-4 Magnum Pro Pneumatic Power Pump

    Fluids in a transmitter or delicate system have always been a concern. East Hills Instruments introduces the only fully versatile pneumatic pump capable of generating pressure up to 4,000 psi without liquid. Two support legs fold out to stabilize the PP4 and the pump can be operated by either foot or hand. The fine vernier control allows the pressure to be finely adjusted and sealed off to prevent slow leaks.
  5. ThermCal400 Dry Block Temperature Calibrator

    The ThermCal400 Dry Block Temperature calibrator is a small, portable and light weight calibrator that is built rugged for field work with specifications good enough to be a laboratory standard. Perform calibration checks on liquid in glass thermometers, dial thermometers, hand held digital indicators, probe assemblies, systems and virtually dozens of other temperature monitoring and recording devices. Checking the performance and accuracy of a temperature sensor is best performed by placing it in precise environment at its true operating temperature.

    Download Data Sheet
  6. Fluke 700HTP-2 Hydraulic Test Pump

    Hydraulic pressure pump capable of generating calibration pressures up to 10,000 psi / 690 bar

    Download Instructions
  7. Magnum Pro Calibration Hoses

    Magnum Pro high pressure calibration hoses are flexible but will not stretch.
  8. Calibration Benches

    The Time Electronics CalBench combines an industrial grade workbench with modular consoles that enable the user to perform calibration and testing applications in one workspace. CalBenches are used worldwide in on-site test facilities, laboratories, and training centres. Each system covers a variety of disciplines and provides technicians with a bespoke work station, focused on end user requirements.

    Download Data Sheet
  9. 5077 Power Calibrator

    A high accuracy power calibrator suitable for calibrating watt-meters, power meters, and kW-Hr meters. Supplied with “Virtual Front Panel” software the user can control the 5077 remotely via laptop or PC.

    Download Data Sheet | Brochure
  10. 5075 7.5 digit Multimeter

    A benchtop digital multimeter that combines high performance with simple operation. The 5075 easily measures from nanovolts to 10kV, from picoamps to 30 amps, from micro-ohms up to 1GΩ, from picofarads to 300µF, with up to 7½ digit accuracy.

    Download Data Sheet | Brochure
Set Descending Direction

Items 21 to 30 of 69 total

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5