PIE 820 Multifunction Process Calibrator

The Practical Instruments Electronics (PIE) PIECAL 820 process calibrator packs the power of six single function calibrators into one surprisingly small package. The perfect complement to any technician's toolbox, the PIECAL 820 combines advanced features, ease of use, accuracy, signal compatibility and compact size to make it the best value multifunction calibrator on the market today.

Download Data Sheet

Availability: In stock

$1,999.00

Details

Details

Features
  • Lighten up your toolbox
    Pocket sized calibrator replaces toolbox of single function devices
    Milliamp • Voltage • Frequency
    Thermocouples • RTDs • Check Continuity
  • Technician friendly operation
    Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIECAL Evolution Calibrators.
  • Use it as a milliamp and voltage calibrator
    Source 0 to 24.00 mA, 0 to 10.25 V dc and -10.00 to 110.00 mV
    Read to 24.00 mA, ±60.00 V dc and and -10.00 to 110.00 mV
    Simulate 2-Wire Transmitters
    Power up transmitters & loops with the built-in 24 V power supply.
    Simplify HART hookups with built-in 250 Ohm resistor
  • Calibrate directly in temperature (°C & °F)
    The PIECAL 820 works with the instruments you use.
    Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P
    (Platinel II)
    Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
    Copper 10 & 50 Ohm, Nickel 100 and 120 Ohm
  • Checkout flow and vibration systems
    Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.00
    Hz, 9999.9 Hz, 9.9999 kHz & to 20.000 kHz
  • Troubleshoot loop & wiring problems
    'Beep' out connections with the built-in continuity checker
  • Easy to read
    Turn on the backlight & easily see the display in dark areas of the plant
  • Quickly set any three outputs plus automatic stepping & ramping
    Easily set any value quickly with the adjustable "DIAL" plus store any three output settings for instantrecall with the EZ-CHECK™ switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds.
  • Measure temperature sensors, frequency pickups, loop currents and voltage levelsCheck the values of your process sensors. Instantly recall MAX and MIN values to see process variability
Advantages of the PIECAL 820 over the Altek 820
  • Automatic stepping & ramping
    Setup 2, 3, 5 & 11 steps or continuous ramp from 5 to 60 seconds to match your test procedures
  • Larger Display with Backlight
    Easy viewing in dark locations
  • More Resistant to Accidental Damage
    Rubber Boot and Stronger Switches
  • More Thermocouple &RTD ranges with 0.1° resolution and better accuracy
    Compatible with smart transmitters, multichannel recorders, PLCs and DCSs (the Altek 820 RTD output is not compatible with many smart transmitters and system input cards)
  • Smaller & 25% lighter
    Pocket sized and easier to carry
  • LED for optical pickups
    LED flashes green in synch with frequency output. Illuminates red for overload conditions.
  • Prices
    The Altek 820 costs $2,384.42 - You save $689 and get a better product, along with the promise of a 2 year quibble free warranty.

Reviews

Write Your Own Review

You're reviewing: PIE 820 Multifunction Process Calibrator

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value