PIE 820/830 PM Multifunction Panel Mount Calibrator

PIE 820/830 PM Multifunction Panel Mount Calibrator

PIE 820/830 PM Multifunction Panel Mount Calibrator

Now you can panel mount PIE 820 & 830 Multifunction calibrators. As part of a calibration bench, the PIE 820PM or 830PM provide an accurate multifunction calibrator that is easy to use and may be removed for annual calibration. Panel mounting a multifunction calibrator is useful whether you are putting a calibration bench in your instrument shop, require a manual loading station in a control panel or for use as a built-in process simulator.

Download Data Sheet | Download Manual
$2,829.00
SKU
PIE PM

Calibrator functions include:

  • Calibrate milliamps and voltage
    Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV
    Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV
    Simulate 2 Wire transmitters
    Power up transmitters and loops with built in 24 V power supply
    Simplify HART hook ups with built in 250 ohm resistor
  • Calibrate directly in temperature (°C & °F)
    Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)
    RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
    Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
    Resistance up to 4010 ohms
  • Checkout flow and vibration systems
    Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99
    Hz, 9999.9 Hz, 20.000 kHz

Calibrator features include:

  • Technician friendly operation
    Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as our handheld models
  • Quickly set any three outputs plus automatic stepping & ramping
    Set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK™ switch
    Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span
    Select RAMP to smoothly increase and decrease the output between Zero and Span
    Set step/ramp time to match your system from 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 and 60 seconds
  • Easily recall stored values
    Use the EZ-CHECK™ switch to recall the HI and LO values automatically stored when in READ mode

Included with each unit:

  • Rugged painted aluminum mounting plate with mounting screws, 110/120V AC adapter
  • 3 year warranty
  • NIST calibration certificate
Write Your Own Review
You're reviewing:PIE 820/830 PM Multifunction Panel Mount Calibrator
Your Rating