1-800-921-9494EMAIL US
0item(s)

You have no items in your toolbox.

Product was successfully added to your shopping cart.

A-E

Set Descending Direction

Items 41 to 50 of 70 total

  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. PIE 820 Multifunction Process Calibrator

    The Practical Instruments Electronics (PIE) PIECAL 820 process calibrator packs the power of six single function calibrators into one surprisingly small package. The perfect complement to any technician's toolbox, the PIECAL 820 combines advanced features, ease of use, accuracy, signal compatibility and compact size to make it the best value multifunction calibrator on the market today.

    Download Data Sheet
  2. PIE 334+ Milliamp Loop Diagnostic Calibrator

    Have you ever replaced a "faulty" transmitter only to find the problem was somewhere else in the loop? And did you end up throwing the transmitter away after you fixed the other problem "just in case" the transmitter was faulty? If you find a loop where the transmitter is calibrated correctly but all the readings elsewhere in the loop have a fixed offset, this is due to Zero Shift. This zero shift is typically caused by some current in the loop bypassing the transmitter. This might be caused by ground faults, moisture or corrosion. If you have some loops that are erratic after it rains, there may be moisture present in a junction box where insulation has broken down. Turn on Ground Leak Detection and use the PIECAL 334Plus to power up the loop. Any current that isn't controlled by the transmitter or other current control element will be indicated as leakage on the PIECAL 334Plus display. The PIECAL 334Plus powers up the 2-Wire transmitter or loop and indicates the total current and the uncontrolled current. This provides information useful in troubleshooting loop errors.

    Download Data Sheet
  3. PIE 541 Frequency Calibrator with Totalizer

    The Practical Instrument Electronics (PIE) Model 541 is the best tool for calibration, test, and diagnosing turbine meters, frequency counters, vibration systems, tachometers, flow meters, vortex shedders, integrators, and any other Frequency devices in the shop, plant and/or field. The Model 541 brings all the features you would expect from a frequency calibrator and times new romanaving new ones. The Model 541 comes with an LED indicator showing gate time for easy trigger level adjustment. Make adjustments with the EZ-Dial™ knob or test limits with the dual action EZ-Check™ switch. Save hours of troubleshooting time on problems when compared to other calibration methods. When calibrating a totalizer, the PIE 541 eliminates the need of a stop watch. This calibrator will automatically stop when the selected number of pulses has been sent to the totalizer. Select from 6 different frequency ranges or select totalize to source or measure pulses within a selectable time.

    Download Data Sheet
    $1,549.00
  4. PIE 535 Voltage Current Calibrator

    Practical Instrument Electronics (PIE) Model 535 brings you the features of the original Model 532 for 10-50 milliamp process loops. On power up you can select 4-20 or 10–50 mA. The EZ-Dial™ knob and EZ-Check™ switch are all that's needed to make quick adjustments or set 0% or 100% of full scale. The EZ-Step™ button provides one-handed stepping. Automatic stepping and ramping modes allow hands-free testing and calibration of the process loop with HIGH accuracy and repeatability designed in collaboration with Nuclear plants. The model 535 offers the optional analog output of 10mV/mA proportional output for connection to chart recorders and data loggers. With the Model 535, calibration is easy as PIE.

    Download Data Sheet | Product Manual
    $3,599.00
  5. PIE 434 Automated Diagnostic 4-20 mA Calibrator

    The Practical Instrument Electronics (PIE) 434 automated diagnostic 4-20 mA calibrator allows you to check, calibrate and measure all of your current signal instruments in a 4-20 mA DC loop. It can be used at any access point in your loop. You can calibrate recorders, digital indicators, stroke valves or any instruments that get their input from a 4-20 mA loop. Quickly diagnose ground fault and current leakage with the PIE 434 automated diagnostic 4-20 mA calibrator's loop diagnostic technology. PIE 434 calibrators also feature automatic output stepping and ramping. Press and hold the dial to automatically step from 4-20 in two, three or five steps or choose a continuous ramp.

    Download Data Sheet
    $1,099.00
  6. PIE 334 Milliamp Loop Calibrator

    The PIECAL 334 is functionally equivalent to similar calibrators with four digit displays, knobs and switches. Improvements over 334s from other manufacturers include better long term stability, accuracy, reliability and ruggedness plus improved battery life. The PIECAL 334 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. The PIECAL 334 is the perfect replacement for your worn out milliamp calibrators!

    Download Data Sheet
  7. PIE 134 Pocket-Cal Milliamp Calibrator

    The PIECAL 134 is functionally equivalent to similar calibrators with four digit displays, knobs and switches. It gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. Choose the PIECAL 134 and get a milliamp calibrator with a battery compartment and a built-in belt clip.

    Download Data Sheet
  8. M-10 Hydraulic Calibration Hand Pump

    Utilizes a fully adjustable stroke control to allow for quick priming, easy pumping, and fast pressure generation up to 10,000 psi (700 bar). The ergonomically engineered handles provide extra comfort, while the patented triple filtration system ensures pump operation in spite of dirty conditions. The shatterproof reservoir and stainless steel construction guarantee leak free operation. The pump has over-sized check valves to provide smooth controlled operation.

    Download Data Sheet & Manual
  9. Magnum Low Pro Volume Pressure Chamber M-80

    Capable of extremely high resolution (0.0001 psi) as it spans the range of near absolute vacuum to low pressures (30" Hg - 80 PSI). It's rugged outer housing and dual o-ring design ensures zero leakage. Not only is the M-80 bench mountable, but it’s relative light weight (3.5 lbs) makes it perfect for field use as well. Optional power drive supplied to rotate the vernier at a quicker pace in-order to speed up your calibrations.

    Download Data Sheet & Manual
  10. MP-P Pressure Calibration Pump

    Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over a decade and can now be found in over two thirds of all power plants. Both models will out perform any manufactured pump in it's category.

    Download Data Sheet & Manual
Set Descending Direction

Items 41 to 50 of 70 total

  1. 3
  2. 4
  3. 5
  4. 6
  5. 7