Product was successfully added to your shopping cart.
PIE calibrators are the evolutionary update to the classic ALTEK line of the 1900's. They are less expensive, thinner, and lighter with sturdy switches and rubber boots. Outstanding features include back-lit displays, automatic stepping & ramping, and "AA" batteries instead of 9V batteries. Additionally, there are more thermocouple and RTD types with better accuracies and ease of use. PIECAL uses the same model numbers to allow for simplicity in replacement.
Terms & Conditions:Offer valid until 9/15/2017. Order must be placed via easthillsinstruments.com. Loopy 5000 is a $200 value. If the PIE Calibrator is returned but the LOOPY 5000 is wished to be kept, a $200 fee will be applied to the refunded total. Refunds are only accepted within 30 days.
The PIECAL 422 is functionally equivalent to similar calibrators with five digit displays, knobs and switches. The PIECAL 422 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. Choose the J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel); -13.000 to 80.000 mVand get a thermocouple calibrator with a backlit display, automatic stepping, simultaneous display of temperature and millivolt reading, a rubber boot and rugged switches with the same high accuracy.
The PIE 422Plus has all the functionality of the PIE 422 Thermocouple Calibrator with a built-in Milliamp Calibrator. Dual Channel High Accuracy T/C Calibrator with 14 T/C types mV; milliamp channel includes Patented Current Leakage test.
The Practical Instrument Electronics (PIE) 525B thermocouple and RTD calibrator is an automated, high accuracy instrument designed to calibrate all your thermocouple and RTD instruments and measure temperature sensors.
Carry eight single function calibrators plus a milliamp calibrator with loop supply in the palm of your hand! Sources & Reads mA, T/C, RTD, V, mV, and Frequency. Also Sources pH, accepts wide range of PIE Digital Pressure Modules, has Loop Diagnostic Capabilities with Patented Current Leakage Test. Includes rubber boot, leads, hands free Carrying Case and FREE NIST Traceable Calibration Certificate.
The Practical Instruments Electronics (PIE) 820-Elite multifunction calibrator performs the work of 8 single function calibrators. Designed for technicians and engineers who require the best tools to do their work, the 820-Elite version of the popular PIE 820 has greater resolution, more ranges, patented current leak detection and standards lab accuracy making it one of the highest performing calibrators on the market today.
The Practical Instruments Electronics (PIE) PIECAL 820 process calibrator packs the power of six single function calibrators into one surprisingly small package. The perfect complement to any technician's toolbox, the PIECAL 820 combines advanced features, ease of use, accuracy, signal compatibility and compact size to make it the best value multifunction calibrator on the market today.
The Practical Instrument Electronics (PIE) Model 532 is the best tool for calibration, test, and diagnosing process loops. The Model 532 brings all the features you would expect from a loop calibrator and times new romanaving new ones. Make adjustments with the EZ-Dial™ knob or test limits with the Dual Action EZ-Check™ switch. Powerful ramping functions are only a button away on the Model 532. Save potentially hours of troubleshooting time on problem loops with the Model 532’s unique Loop Diagnostic Mode, only available at PIE! In Loop Diagnostic Mode, the loop current, voltage, impedance, AC voltage, and mode of operation are all displayed simultaneously eliminating the need of a DMM connection. Loop diagnostics is available in every mode of operation and truly is a diagnostic monitor, as parameters are continuously updated in real time. The smart diagnostic tool even indicates the most likely cause of loop failure! Loop Diagnostic features the ability to measure ground fault error caused by faulty wiring, flooded conduit and corrosion bridges.
Have you ever replaced a "faulty" transmitter only to find the problem was somewhere else in the loop? And did you end up throwing the transmitter away after you fixed the other problem "just in case" the transmitter was faulty?
If you find a loop where the transmitter is calibrated correctly but all the readings elsewhere in the loop have a fixed offset, this is due to Zero Shift. This zero shift is typically caused by some current in the loop bypassing the transmitter. This might be caused by ground faults, moisture or corrosion.
If you have some loops that are erratic after it rains, there may be moisture present in a junction box where insulation has broken down. Turn on Ground Leak Detection and use the PIECAL 334Plus to power up the loop. Any current that isn't controlled by the transmitter or other current control element will be indicated as leakage on the PIECAL 334Plus display.
The PIECAL 334Plus powers up the 2-Wire transmitter or loop and indicates the total current and the uncontrolled current. This provides information useful in troubleshooting loop errors.