Calibration Pumps

Industrial Calibration Pumps used for calibrating pressure instruments.
Set Descending Direction

9 Items

per page
  1. PP-4 Magnum Pro Pneumatic Power Pump
    Rating:
    88% of 100
    Fluids in a transmitter or delicate system have always been a concern. East Hills Instruments introduces the only fully versatile pneumatic pump capable of generating pressure up to 4,000 psi without liquid. Two support legs fold out to stabilize the PP4 and the pump can be operated by either foot or hand. The fine vernier control allows the pressure to be finely adjusted and sealed off to prevent slow leaks. Learn More
    $3,799.00
    Add to Compare
  2. Fluke 700HTP-2 Hydraulic Test Pump
    Rating:
    0%
    Hydraulic pressure pump capable of generating calibration pressures up to 10,000 psi / 690 bar

    Download Instructions Learn More
    $999.00
    Add to Compare
  3. Crystal GaugeCalHP Pressure Comparator
    Rating:
    0%
    The GaugeCalHP is a portable, self contained, hydraulic pressure generator for calibrating pressure gauges, transmitters, sensors, and safety valves.

    Download Datasheet | Manual Learn More
    $4,293.00
    Add to Compare
  4. Condec Source 3000 Pressure Source
    Rating:
    0%
    Fully pneumatic, the Condec Source 3000 pressure source offers a clean and dry pressure up to 3000 psi. A quick, accurate, and portable pressure source, the new Condec Source 3000 pressure source is designed for extended use wherever your job takes you.

    Download Data Sheet Learn More
    $4,400.00
    Add to Compare
  5. M-10 Hydraulic Calibration Hand Pump
    Rating:
    93% of 100
    Utilizes a fully adjustable stroke control to allow for quick priming, easy pumping, and fast pressure generation up to 10,000 psi (700 bar). The ergonomically engineered handles provide extra comfort, while the patented triple filtration system ensures pump operation in spite of dirty conditions. The shatterproof reservoir and stainless steel construction guarantee leak free operation. The pump has over-sized check valves to provide smooth controlled operation.

    Download Data Sheet & Manual Learn More
    $1,199.00
    Add to Compare
  6. Magnum Low Pro Volume Pressure Chamber M-80
    Rating:
    93% of 100
    Capable of extremely high resolution (0.0001 psi) as it spans the range of near absolute vacuum to low pressures (30" Hg - 80 PSI). It's rugged outer housing and dual o-ring design ensures zero leakage. Not only is the M-80 bench mountable, but it’s relative light weight (3.5 lbs) makes it perfect for field use as well. Optional power drive supplied to rotate the vernier at a quicker pace in-order to speed up your calibrations.

    Download Data Sheet & Manual Learn More
    $1,399.00
    Add to Compare
  7. MP-P Pressure Calibration Pump
    Rating:
    91% of 100
    Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over a decade and can now be found in over two thirds of all power plants. Both models will out perform any manufactured pump in it's category.

    Download Data Sheet & Manual Learn More
    $499.00
    Add to Compare
  8. MP-V Vacuum Calibration Pump
    Rating:
    90% of 100
    Features a Delrin® plastic handle that prevents body heat transfer from interfering with readings, as well as an oversized check valve for smooth operation. The dual o-rings on all pistons ensure zero leakage. MP-P and MP-V have been in service for over a decade and can now be found in over two thirds of all power plants. Both models will out perform any manufactured pump in it's category.

    Download Data Sheet & Manual Learn More
    $499.00
    Add to Compare
  9. MVP-600 Pneumatic Calibration Hand Pump
    Rating:
    92% of 100
    Produces pneumatic pressure and vacuum to check calibration of gauges, switches, transmitters, and recorders. The contoured cushioned handles provide extra comfort while preventing the pump from sliding. The over-sized check valve provides smooth operation throughout the output range while the dual o-rings on all pistons ensure zero leakage. Patented Mash proof vent valve comes standard on all MVP-600s (No Needle Valve) and a non-oil based lubricant is used on all moving parts.

    Download Data Sheet & Manual1 Learn More
    $899.00
    Add to Compare
Set Descending Direction

9 Items

per page