PIE 211 Automated RTD Calibrator

Features

• Calibrate with Ease
  Resolution to 0.1 °F & °C; Accurate to 0.2°
• Source and Read Multiple RTD Curves plus Ω
  Accurate to ±0.025% of Span at 4.00 & 20.00
  Platinum 100 Ω: 1.3850, 1.3902, 1.3926
  Platinum 1000 Ω: 1.3850, 1.3750 (Pt 1000 Ω limited to 266.0°C/511.0°F)
  Copper 10 & 50 Ω; 0.00 to 2001.0 Ω
  Custom ranges available - consult factory
• Automatically Detect 2, 3 & 4 Wire Connections
  Troubleshoot sensor connections & find broken wires with patented technology
• Guaranteed Compatible with all Instrumentation
  Works with Rosemount & Honeywell Smart Transmitters, PLCs, DCSs, Multi-channel Recorders and other pulsed excitation devices.
• Faster Calibration
  Instantly select three outputs with EZ-CHECK switch
  Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
• Easily Change RTD Types & Scale
  Double click to select RTD Type & °F & °C
• Easy-to-Read Display
  Turn on the backlight to read in dark areas of the plant
• Simple "No Tool" Battery Changes
  Four inexpensive "AA" batteries
• Use in the Plant, Field or Shop
  Includes Rubber Boot and RTD Wire Kit (020-0208)

Advantages of the PIECAL 211 over the Altek 211

• Compatible with Newer Instrumentation
  Works with Rosemount & Honeywell Smart Transmitters, PLCs, DCSs, Multi-channel Recorders and other pulsed excitation devices. Higher accuracy at low excitation curents
• Automatic Stepping
• Larger Display with Backlight
  Easy viewing in dark locations
• More Resistant to Accidental Damage
  Rubber Boot and Stronger Switches
• Separate Battery Compartment
  No more removing housing with screwdriver to replace batteries
  Calibration seals remain intact
• Easily Change RTD Types
  Reconfigure without resetting calibrator