The Practical Instrument Electronics (PIE) Model 532 is the best tool for calibration, test, and diagnosing process loops. The Model 532 brings all the features you would expect from a loop calibrator and times new romanaving new ones. Make adjustments with the EZ-Dial™ knob or test limits with the Dual Action EZ-Check™ switch. Powerful ramping functions are only a button away on the Model 532. Save potentially hours of troubleshooting time on problem loops with the Model 532’s unique Loop Diagnostic Mode, only available at PIE! In Loop Diagnostic Mode, the loop current, voltage, impedance, AC voltage, and mode of operation are all displayed simultaneously eliminating the need of a DMM connection. Loop diagnostics is available in every mode of operation and truly is a diagnostic monitor, as parameters are continuously updated in real time. The smart diagnostic tool even indicates the most likely cause of loop failure! Loop Diagnostic features the ability to measure ground fault error caused by faulty wiring, flooded conduit and corrosion bridges.
The PIECAL 422 is functionally equivalent to similar calibrators with five digit displays, knobs and switches. The PIECAL 422 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. Choose the J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel); -13.000 to 80.000 mVand get a thermocouple calibrator with a backlit display, automatic stepping, simultaneous display of temperature and millivolt reading, a rubber boot and rugged switches with the same high accuracy.
The PIECAL 322-1 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. Choose the PIECAL 322 and get a thermocouple calibrator with a backlit display, a rubber boot and rugged switches with the same high accuracy.
The PIECAL 311 is functionally equivalent to similar calibrators with five digit displays, knobs and switches. The PIECAL 311 gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. Choose the PIECAL 311 and get an RTD calibrator with a more digits (0.01° resolution), automatic stepping, backlit display, a rubber boot and rugged switches. It is also compatible with more instruments in the field.
The PIECAL 211 is functionally equivalent to similar calibrators with five digit displays, knobs and switches. It gives you advantages of an updated design while maintaining the familiar, time proven ease of use of similar calibrators. Choose the PIECAL 211 and get an RTD calibrator with a backlit display, a rubber boot and rugged switches.